qt2410_boot_usb - QT-2410 USB RAM loader
(C) 2006 by Harald Welte <hwelte@hmw-consulting.de>
================================================================

Using this ram loader it is possible to download (and execute) code 
from the host PC into the SDRAM of a QT-2410 development board.

Use the following steps:

1) power-off QT-2410
2) put the small dip switch on the CPU "KERNEL" board into setting NOR
3) connect USB Device port with USB hob of host PC
3) power-on QT-2410
4) start the ram loader by running

	loadeboot_usb 0x30008000 /file/to/code

   to download /file/to/code into RAM address 0x30008000

You can watch the progress of the download on the serial port of QT-2410 (115200 bps)
